MAC-PHY connects MCUs to 10Base-T1S networks
Microchip’s LAN8650/1 combines a media access controller (MAC) and Ethernet PHY to enable low-cost MCUs to access 10Base-T1S automotive networks. A standard serial peripheral interface (SPI) allows the LAN8650/1 to interface with nearly any 8-bit, 16-bit, or 32-bit MCU, including those that do not have a built-in Ethernet MAC. The 10Base-T1S Ethernet PHY transmits 10 Mbps over a single balanced pair and conforms to the IEEE 802.3cg-2019 standard.
The LAN8650/1 is equipped with time-sensitive networking (TSN) support, which permits synchronized timing across far-reaching Ethernet networks. Time synchronization is critical for many automotive applications, such as advanced driving assistance systems (ADAS).
Compliant with AEC-Q100 Grade 1 requirements for enhanced robustness in harsh environments, the LAN8650/1 operates over the extended temperature range o -40°C to +125°C. It is also functional safety ready and intended for use in ISO 26262 applications.
The part is housed in a 32-pin, 5×5-mm VQFN package. Samples of the LAN8650/1 can be ordered online by using the product page link below.
Find more datasheets on products like this one at Datasheets.com, searchable by category, part #, description, manufacturer, and more.
googletag.cmd.push(function() { googletag.display(‘div-gpt-ad-native’); });
–>
The post MAC-PHY connects MCUs to 10Base-T1S networks appeared first on EDN.
