Instrument improves oscilloscope calibration
A multichannel oscilloscope calibration system, the Fluke 9500C automates time-consuming testing to maintain scope accuracy and reliability. The 9500C provides simultaneous output on all channels and can be fully automated with MET/CAL software for hands-free operation.
A core component of the 9500C mainframe is the 9540C active head. Each mainframe can control up to five heads, enabling the calibration of a 4-channel oscilloscope with an external trigger. The ability to actively drive all four active heads at the same time with simultaneous output results in faster test times and eliminates lead changes.
The compact 9.4×4.6×2.2-cm active head generates calibration signals at the oscilloscope input. It enables the 9500C to deliver various signals: DC levels up to ±220 V, calibrated amplitude square waves up to 210 V pk-pk from 10 Hz to 100 kHz, and leveled sinewaves from 0.1 Hz to 4 GHz with precisely controlled pulse edges.
If full automation is not immediately required, the 9500C can be configured with just a few, or even one, active head. Additional heads can be easily added as needs change. To request a price quote, use the link to the product page below.
Find more datasheets on products like this one at Datasheets.com, searchable by category, part #, description, manufacturer, and more.
googletag.cmd.push(function() { googletag.display(‘div-gpt-ad-native’); });
–>
The post Instrument improves oscilloscope calibration appeared first on EDN.
