Page 39 - Autumn 2024

Institution of Electronics News

moment it is unset, we shall require to have the right- gram, it should be explained that for the input end a
hand side of V2 conducting. zero will be high, and a digit low, i.e. a negative pulse.
The output from the adder will be the reverse of this
Referring to the three lines at the top of the diagram, in that a zero will be low and a digit high, but the out-
the upper is held at 50 volts + and the lower at 160 put is passed through invertors, not shown, so that
volts +. The centre line is the one along which the potentials throughout the machine are similar. For the VOLUNTEER OPPORTUNITY
negative shifting pulses arrive. Therefore, when a nega- purpose of demonstrating an example, we shall treat a
tive pulse is applied to the condensers C1 and C2, it will low as negative and a high as positive.
not affect the diode D2, as this is biased off by the 135
volts positive potential, but the diode D1 is in the con- Let us assume then that we wish to add a digit on
dition where it is ready to conduct as both ends are at the A line to a zero on the B line. The adder should
50volts. Thus, a negative pulse will be reflected on the then give out a sum, but no carry. This means that a
right-hand side of this diode and will be applied to the negative pulse is applied to the A line, which will cause
condenser C4, and on to the grid of the left-hand anode the upper left-hand diode to conduct, thus the negative
of V2. This negative pulse will tend to reduce the con- pulse will appear at the right-hand grid of the valve and
duction of V2 and its anode potential will therefore rise prevent it from conducting, and the anode will therefore
and the potential of the point between the two 100k go high. Now at the same time, a positive pulse is
resistors will also rise. The right-hand grid of V2 will applied to the B line and the lower right diode will Community Radio ... fun, yes, but also a learning experience. Flame
therefore go high, thus causing it to conduct slightly, therefore conduct and give a positive pulse to the left- CCR is a training centre, approved and supported by the Institution of
and its anode will then go low as will the point between hand grid, causing this anode to conduct and its poten- Electronics. But what is the training gain? As well as the enjoyment of
the two right-hand 100k resistors. The left-hand grid tial will therefore go low. The negative potential is playing music, and playing with computers and technology, people
will therefore lower and so on. It will therefore be now transmitted to the grid of the single valve, prevent- also learn TO TALK.
seen that the effect is cumulative and that the trigger V2 ing it from conducting and allowing its anode to remain
will assume the state of V1, in that its right-hand anode at a high potential. We therefore have, on the output Sitting in front of a microphone, only being able to imagine a listener
will be conducting, and the left-hand one cut off. lines, a low on the carry which represents zero, and a or two, with music providing a timescale, focuses the mind in a
Perhaps this would be the point to explain that when high on the sum which indicates a digit. challenging way. What to say, how to say it, on cue is surprisingly
the machine is switched on from cold all the triggers, If we now apply a low at A and B the output should difficult. Developing a patter with other people is a challenge - it is
after the warming up period, must assume the unset be a carry, but no sum. Now, a low at A will cause said that “good radio is a conversation between two people overheard
condition. This is achieved by inserting a resistance in the upper left-hand diode to conduct, giving a low at on a bus”. Presenters have to get used to the sound of their own voice,
the negative feeds of the right-hand side of all the trig- the right-hand grid and a high at its anode. A low at learn how to speak clearly in a flowing manner, and how to engage in
gers, the resistance being shorted out after a predeter- B will cause the upper right-hand diode to conduct, thus conversation with other people - in an ordered manner not talking over
mined time when it will be known that all triggers are causing this grid to go even lower. Normally the line
in the unset condition. containing the diodes conducts slightly thus tending to each other (reading body language).
keep the right-hand grid at a potential above the -310V, Based on our experience in bringing many new voices to air, we believe
but since the negatives applied at A and B have biased that radio does offer a training gain, to all ages. And in addition to
off the lower diodes, the potential of the left-hand grid
will go low and its associated anode will go high. Thus, being live, radio can also be recorded and professionally produced,
we have arrived at the condition where both anodes are and repeatable as podcasts. Give it a try .... there are hundreds of
high. The left-hand anode will apply its high potential community radio stations across the UK looking for volunteers.
to the grid of the right-hand valve and its anode will
therefore go low. Now, although a high potential is Contact us at flameccr@gmail.com and find out all about Flame,
already connected to the anode the low will have pri- listen to us or delve through our podcasts on flameradio.org.
ority and the outputs will therefore be a low at the Sum
giving zero, and a high at the Carry giving a digit.
The electronic multiplier just described was the first
to be built by our Company, and does not include any
division circuits, but since then two improved versions
have been designed, the second of which is just going
into production. This machine incorporates a high
speed rotating drum storage device which replaces the
capacitor stores on the earlier machines. In addition to
Fig. 29. The Half Adder. Visit our website!
these, an Electronic Computer is also manufactured,
Finally, I should like to explain the operation of the but of course a lecture of this type could not hope to
cover all the electronic machines built by Hollerith.
Half-adder. It should be remembered that the purpose Why not head down to our website and
of this device is to give a Sum output for an input of 1 In giving a description of the Multiplier, I have only
digit, with no carry, and also to give, for two digits, a chosen a few basic circuits, but we can look forward to read more news in our blog section?
Carry output but no sum. Referring then, to the dia- future lectures which will cover the ground more fully.

Updated daily with hand-picked articles
from around the web...

21 institutionofelectronics.ac.uk

39
Become a member: https://membermojo.co.uk/ie
Become a subscriber: https://membermojo.co.uk/subscriber
Become a sponsor: https://membermojo.co.uk/sponsor