Linear redriver enhances smart-cockpit connectivity
Diodes’ PI3DPX1225Q is an automotive 6:4 active crossbar multiplexer with a linear redriver operating at 10 Gbps. It routes USB 3.2 and DisplayPort 2.1 signals through a USB Type-C connector, offering low-latency connectivity with high signal integrity for smart cockpits and rear-seat entertainment systems.
The PI3DPX1225Q supports three operating modes: it can connect a single USB 3.2 Gen 2 lane to the USB Type-C connector, one USB 3.2 Gen 2 lane and two DisplayPort 2.1 UHBR10 channels, or four DisplayPort 2.1 UHBR10 channels. Additionally, the device includes an AUX listener that automatically swaps AUX channels when a flipped USB Type-C cable is detected.
In each operating mode, continuous time linear equalization (CTLE) adjusts differential signals, with output compression swing and flat-gain controlled via I2C. This reduces ISI jitter and optimizes 10-Gbps signal performance across various mediums. CTLE supports DP 2.1 transparent link training without affecting the decision feedback equalizer (DFE) receiver’s adaptive controls.
The crossbar linear redriver is AEC-Q100 Grade 3 qualified, operating over a temperature range of -40°C to +85°C. Prices for the PI3DPX1225Q in a 40-pin, 4×6-mm WQFN package start at $1.87 each in lots of 3500 units.
Find more datasheets on products like this one at Datasheets.com, searchable by category, part #, description, manufacturer, and more.
googletag.cmd.push(function() { googletag.display(‘div-gpt-ad-native’); });
–>
The post Linear redriver enhances smart-cockpit connectivity appeared first on EDN.
