• Become a member
  • Log In
The Institution of Electronics
  • Home
  • About us
    • Our Objectives
    • Our History
    • Governance of the Institution
  • The Electron Magazine
    • 2024
      • 2024 – Winter
      • 2024 – Spring
      • 2024 – Summer
      • 2024 – Autumn
    • 2025
      • 2025 – Winter
      • 2025 – Spring
      • 2025 – Summer
      • 2025 – Autumn
    • 2026
      • 2026 – Winter
      • 2026 – Summer
  • Members
    • Membership Grades and Fees
    • Members’ Resources
      • The Electron Newsletter
      • The Archives
  • Education and Projects
    • National Electronics Competition
    • Student Members’ Projects
    • Arkwright Engineering Scholarships
  • News
  • Contact Us
  • Menu Menu
Uncategorised

Capacitor ESR challenges high-current, fast-transient power sources

One of the first things that a beginning EE student encounters is a brief overview of the three passive components: resistor, capacitor, and inductor. Each has a simple schematic-diagram symbol and is defined by a correspondingly simple equation (Figure 1).

Figure 1 Along with the concept of voltage and current, the role of the three passive components and their defining equations are part of any “Introduction to Electronics” class. Source: LinkedIn

These entry-level courses sometimes mention that in the real world of actual physical components, the equivalent models of these vital components are more complicated. Each has tiny amounts of parasitic inductance and capacitance, which is usually only a concern when operating frequencies reach into the tens and hundreds of kilohertz and then upward from there.

But for capacitors and inductors, there’s also unwanted resistance. For the inductor, DC resistance is primarily due to the wire or material of the inductor. It is seen as reduced Q (quality factor) and “sharpness” in addition to IR dissipative loss.

For the capacitor, the issue is equivalent series resistance (ESR), which is due to leads and wiring as well as the internal construction of the capacitor. A better model of a capacitor, shown in Figure 2, adds stray inductance (ESL), internal resistance (IR), and ESR.

Figure 2 This more-realistic model of a real capacitor shows the ESR, IR, and ESL imperfections. Source: Murata Manufacturing

Keep in mind that capacitance indicates how much energy is stored, while ESR indicates how effectively that energy can be delivered.

ESR is an increasingly critical parameter as power banks at data centers of all types draw huge amounts of power and they also have sharp spikes in demand that require the capacitor array to suddenly provide current. It’s a concern for both conventical bulk capacitors as well as supercapacitors (more formally called electric double layer capacitors or EDLCs), even though their ESR is on the order of a milliohm.

Note that high-frequency bypass capacitors have a different structure using different materials and can have an ESR in the order of tens of milliohms. However, they are used in a very different role and relatively high ESR is not an issue.

A capacitor bank with excessive ESR will have higher power losses, more heat-induced degeneration, and accelerated degradation. During a sharp power-demand transient, the power subsystem may even fail to deliver the needed current, leading to brownouts and system-level instability.

ESR tells a lot about the power subsystem. For supercaps, it’s a figure of merit that summarizes the combined effects of electrode material, electrolyte conductivity, and contact-path resistance. As a marker for capacitor unit-to-unit consistency and overall state of health, it enables proper cell matching and uniformity, which is critical in the large series and parallel capacitor arrays. Small differences in ESR across a large array can be amplified at the system level, resulting in reduced performance.

What about test?

It’s one thing to talk about ESR, but how do you measure it? No, you can’t just use an ordinary multimeter, as that provides only a DC current source. Accurate ESR calculation requires fully capturing the transient voltage drop that occurs at the moment the current switches.

Instead, an AC-driven test is needed, usually performed at different frequencies, as series resistance is a function of that factor as well. There are three common approaches for evaluating EDLC ESR (Figure 3).

Figure 3 Take your pick: there are three widely accepted ways to measure ESR, each with somewhat different perspectives. Source: Chroma ATE

  • IEC 62391: Fixed electric double-layer capacitors for use in electric and electronic equipment (Part 1) is generic specification that focuses on measuring voltage drop at the instant of constant-current discharge.
  • The Maxwell Six-Step method derives ESR from voltage changes during discharge and rest periods.
  • QC/T 741 is a Chinese standard that applies primarily to supercapacitors in traction applications such as electric vehicles and includes evaluation under pulse power conditions.

Not only does each test yield slightly different results, but there are subtle issues related to use of fast sampling rate to capture the fast-moving signals versus use of moving averages to smooth out noise. Fortunately, there are commercial test systems designed to measure ESR alone or in combination with battery-pack performance.

For example, Zurich Instruments offers the MFIA 500 kHz/5 MHz impedance analyzer that applies frequency-dependent technique to characterize ESR from millihertz to kilohertz (Figure 4). They maintain it is superior to the Maxwell Six-Step process which facilitates values of ESR as a static value.

Figure 4 A supercapacitor is connected to the MFIA via an impedance test fixture for ESR test. Source: Zurich Instruments

Their advanced instrumentation and associated test fixture compensate for the effect of series impedances in the cables, connectors, and soldering points, and is also factory-calibrated to compensate for its internal parasitics.

Although every capacitor type is different, the test results for one 3,000 Farad supercapacitor show realities versus its frequency and sub-milliohm ESR at about 50 Hz (Figure 5).

Figure 5 A screenshot showing data taken on the 3000-F capacitor. The graph shows the capacitance (red trace) as a function of frequency, and the absolute impedance Z (blue trace). The floor of the absolute impedance represents the ESR. The light blue trace is the phase between Re(Z) and Img(Z). Source: Zurich Instruments

For a larger-scale test, Chrome ATE offers the Chroma 17010 battery reliability test system, a high-precision, multifunctional charge/discharge rack-mount testing platform designed for lithium-ion battery cells, EDLCs, and lithium-ion capacitors. It offers two system architectures: a linear circuit series offers minimal output noise and highest accuracy for development of small and medium-sized energy-storage components, while the regenerative AC/DC bidirectional series is for testing and life evaluation of larger arrangements.

What’s next?

There are two take-away lessons here. First, ESR is an important parameter, especially in high-current, fast-switching power subsystems. Second, making meaningful ESR measurements is not easy.

But once you have stopped worrying about ESR, you can start worrying about its complement: equivalent series inductance (ESL). ESL is the parasitic inductance within a supercapacitor, which also becomes significant when dealing with rapidly changing currents.

As with ESR, low value is important for maintaining performance in applications where the current changes and as with ESL, high value can lead to inefficient energy transfer and limit the response time of the device.

Bill Schweber is a degreed senior EE who has written three textbooks, hundreds of technical articles, opinion columns, and product features. Prior to becoming an author and editor, he spent his entire hands-on career on the analog side by working on power supplies, sensors, signal conditioning, and wired and wireless communication links. His work experience includes many years at Analog Devices in applications and marketing.

Related Content

  • Looking at Hybrid Supercapacitors
  • Don’t let ESR waste power and cook capacitors
  • Would better electrolytic capacitors reduce e-waste?
  • A short primer on X- and Y-capacitors in AC power supply
  • Infused concrete yields greatly improved structural supercapacitor

The post Capacitor ESR challenges high-current, fast-transient power sources appeared first on EDN.

17 November 2026
http://institutionofelectronics.ac.uk/wp-content/uploads/2022/12/IOE_LOGO.png 0 0 whdsolutions http://institutionofelectronics.ac.uk/wp-content/uploads/2022/12/IOE_LOGO.png whdsolutions2026-11-17 10:55:192026-11-17 10:55:19Capacitor ESR challenges high-current, fast-transient power sources

Latest news

  • Capacitor ESR challenges high-current, fast-transient power sources17 November 2026 - 10:55
  • Building AI SoCs with a continuous hardware verification strategy17 November 2026 - 06:53
  • Inspecting a DOCSIS 3.1 cable modem’s internals: Part 116 November 2026 - 13:40
  • The shocking science (and art) of plastic welding16 November 2026 - 06:33
  • Physical AI: Where AI meets the physical world13 November 2026 - 14:36
  • The tchotchke13 November 2026 - 13:33
  • Google’s Fitbit Air: Another display-less option for tech you wear12 November 2026 - 13:11
  • MCU revitalizing SDVs with diverse compute, virtual prototyping12 November 2026 - 12:10
  • Automotive LED driver advances animated lighting11 November 2026 - 21:59
  • Isolated gate drivers serve power-switching needs11 November 2026 - 21:59
IOE LOGO 2

Become a member

click here

Become a member

click here

Become a subscriber

click here

Become a sponsor

click here

© Copyright - The Institution of Electronics | Website by WHD Solutions
  • Link to LinkedIn
  • Link to Facebook
  • Link to X
Link to: Building AI SoCs with a continuous hardware verification strategy Link to: Building AI SoCs with a continuous hardware verification strategy Building AI SoCs with a continuous hardware verification strategy
Scroll to top Scroll to top Scroll to top